Nitoseal Primer MS2 is a two component solvent based epoxy resin primer, designed for use with Fosroc MS600 Sealant for priming before application of the sealant. An easy to apply primer with strong adhesion.
Contains Primer MS2: PART A 0.441kg - PART B 0.331kg
Application
Empty the entire contents of the hardener tin into the base tin, replace base tin lid. Mix thoroughly, by shaking for 2 minutes.
Prime the joint face using a clean dry brush. Avoid over application of primer causing puddles in the bottom of the joint. Sealants should be applied between 30 minutes and 4 hours after priming.
If the joint is not sealed overnight the primer film should be removed by grit blasting or grinding and the joint reprimed. The mixed Primer MS2 must be applied within one working day. Do not use part packs.
